Fixing “Atomizer Short” and Other Vape Mod Errors

The primary advantage of having a vape mod is its adaptability. With mods such as the Innokin Sensis or the Innokin Kroma 217, you are given a customizable vaping system that can be tailored to meet your preferences. You have the ability to attach any vape tank that you choose and adjust the settings of the device to achieve your desired warmth and flavor.

However, a potential downside of owning a vape mod is that the myriad combinations of hardware and settings might lead to a configuration that does not function properly. This could result in an error message such as “Atomizer Short” appearing on your mod.

Each Innokin vape mod comes with a printed manual that offers guidance for troubleshooting common issues and error messages faced during vaping. However, it can sometimes be beneficial to have an extended troubleshooting guide that provides a more in-depth explanation of frequent vape mod issues. This is precisely what you have found here. On this page, you will discover advice to help you resolve any error message on your vape mod.

General Tips for an Enjoyable Vaping Experience

This guide will start with some essential tips to ensure a seamless vaping experience, regardless of the device in use. These tips are universal for all vape mods.

• Keep your vape tank filled at all times. A low e-liquid level prevents the coil’s wick from adequately soaking in e-liquid. If the wick runs dry, it may burn, compromising the coil’s flavor quality.
• Exercise caution when taking apart your vape tank to swap the coil. A misaligned tank can leak, and a crooked coil might trigger error messages. It’s frustrating to see an error like “Atomizer Short” after refilling your tank, resulting in wasted e-liquid.
• When you install a new coil, start with a low wattage setting and gradually increase the power until you reach your preferred flavor intensity. Vaping at high wattage too soon can burn the coil’s wick before it has a chance to break in properly.
• Charge your vape mod via your computer’s USB port unless you have a mod with removable batteries, in which case a high-quality external charger is advisable. Avoid using fast-charging wall adapters made for mobile devices, as they may lead to overheating of your vape mod.
• Only use high-amperage batteries that are free from damage in your vape mod. Dispose of any batteries that exhibit physical harm. If your vape mod requires two batteries, ensure they are identical and of the same age. Always charge and use these batteries as a matched pair.

Resolving an “Atomizer Short” or “Coil Short” Error Message

An “Atomizer Short” error indicates that while the device recognizes the atomizer coil, the circuit is either short or incomplete. This situation can lead to an unsafe load on the battery, prompting your vape mod to identify the short and present an error when you attempt to vape. Here are the steps to diagnose the issue.

• If you’re utilizing a rebuildable atomizer, verify the coil’s resistance using an external resistance tester if available. It’s probable that there’s a misconfiguration with the coil. For instance, a lead from the coil might be contacting the outer casing of the atomizer.
• If your vape tank contains pre-built coils, disassemble and then reassemble the tank to ensure that everything is tightened properly and not cross-threaded. Additionally, clean the center pins on the threading of both the vape tank and mod. Should the “Atomizer Short” error persist, consider replacing the coil.

Resolving a “Low Battery” or “Low Volt” Error Message

Your vape mod showing a “Low Battery” or “Low Volt” error indicates that the battery’s voltage is insufficient for normal operation, signaling it’s time for a recharge. If this message persists after trying to recharge, ensure you’re connecting the device to your computer’s USB port. Wait for the charge cycle to complete before attempting to use it again.

Should your vape mod still show the “Low Battery” alert after charging, the battery might have deteriorated to the extent that it can no longer maintain a useful charge. In cases where the battery is removable, replacing the old battery with a new one is recommended. For devices with a non-removable battery, replacing the entire device might be necessary. Remember, the Innokin warranty covers manufacturing defects for the first 90 days after purchase. Registering your product at the time of purchase may also qualify you for an extended warranty of 180 days.

 

Resolving a “Check Coil” Error Message

The “Check Coil” error message on your vape mod suggests that while the device detects the coil, its resistance may be out of the supported range or that the coil isn’t properly connected to the device. To address this issue, follow the steps provided under the “Atomizer Short” error section. Ensure that the contacts at the bottom of the tank and on top of the vape mod are clean, free from dirt and spilled e-liquid. Consider disassembling and then reassembling the tank. If the error persists, it may be time to replace the coil.

 

Resolving a “Vape Cutoff” or “Time Out” Error Message

When your vape mod presents the error message “Vape Cutoff” or “Time Out,” it indicates that your puffs are too lengthy, surpassing the built-in puff length limiter of the device. This limiter is designed to prevent overheating during prolonged vaping sessions and to safeguard against unintended activation of the fire button while the device is being transported or stored.

For some advanced models of Innokin vape mods like the Innokin Kroma 217 and the Innokin Sensis EZ, you have the option to adjust the puff limiter according to your requirements. To modify the maximum puff duration, access the mod’s main menu and navigate to the “Settings” section. From there, select the “Cutoff” option within the “Settings” menu, where you can set the puff length anywhere from 3 to 18 seconds. Always be cautious with very long puffs, as a dry wick can lead to burning. A burnt wick will negatively impact the flavor produced by the coil.

 

Fixing an “Overheat” or “High Temp” Error Message

Your Innokin vape mod is equipped with a temperature sensor located on the device’s circuit board. This sensor is responsible for monitoring the internal temperature of the device to prevent overheating. An “Overheat” or “High Temp” error message signifies that the internal temperature has surpassed 90 degrees Celsius, posing a risk of damage to the device’s internal components if continued use occurs.

Overheating of a vape mod is generally due to overly aggressive vaping, often referred to as “chain vaping,” or due to operation in excessively hot conditions such as direct sunlight. As vaping devices can produce significant heat during use, it is advisable not to employ a vape mod in extremely hot environments or under direct sunlight. Relocate your device to a cooler area and allow it some time to rest before resuming vaping.

It’s essential to always store your vape mod in a cool place when not in use. If you’re outdoors and need to set your device aside temporarily, opt for a shaded area.

location. It is important never to leave your vape mod inside a parked car.

Resolving a “Low Res” Error Message

When you see a “Low Res” error message, it means that your vape mod has identified the installed atomizer coil, but it is registering a resistance that falls outside the mod’s acceptable range. If you’re utilizing a third-party tank, refer to your vape mod’s instruction manual to confirm the lowest resistance it can support. For instance, the Innokin Sensis EZ has a minimum resistance of 0.2 ohm, whereas the Innokin Kroma 217 allows for coils with a resistance as low as 0.05 ohm.

Should you think that your vape mod should be compatible with the coil you have connected, take the following steps as described earlier in the section addressing the “Atomizer Short” error message. First, clean the threading on both your tank and vape mod. Ensure that your tank is correctly assembled and that all parts are secured tightly without cross-threading. If the error message persists, the coil may be defective due to manufacturing issues, and you should consider replacing it.